Standard model

• System Performance : Standard (100mA/10V)
• Current compliance : ±100 mA 
• Maximum output Voltage  : ±10 V 
• Potentiostat Bandwidth  :  >500 kHz
• Stability settings : High Speed, Standard, and High Stability
• Programmable response filter : 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
• Signal acquisition : dual channel 16 bit ADC, 100.000 samples/sec

Potentiostat

• Applied potential range : ±10 V, at 0.333mV resolution
• Applied potential accuracy : 0.2%, or 2 mV
• Current ranges : ±10 nA to ±100 mA (±1A, ±10A)
• Measured current resolution : 0.015% of current range, minimum 1.5pA
• Measured current accuracy : 0.2%

Galvanostat     

• Applied current resolution : 0.033% of applied current range
• Applied current accuracy : 0.2%
• Potential ranges : ±10 mV, ±100 mV, ±1 V, ±10 V (±20V)
• Measured potential resolution : 0.004% of potential range, minimum 0.4µV
• Measured potential accuracy : 0.2%, or 2mV

Impedance Analyser (optional)     

• Frequency range : 10µHz to 1MHz
• Amplitude : 0.015mV to 1.0V, or 0.03% to 100% of current range
• DC offset  : 16 bit dc offset subtraction, and 2 dc-decoupling filters

Electrometer    

• Input impedance : >100 Gohm //<20pF
• Input bias current : <20 pA
• Bandwidth : >5 MHz