System Performance

• Current compliance : ±10 mA
• Maximum output Voltage : ± 8 V
• 3 Electrodes : WE, CE, RE and GND (2mm banana plugs)
• Potentiostat Bandwidth : >1 MHz
• Stability settings : High Speed, Standard, and High Stability
• Programmable response filter : 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
• Signal acquisition : dual channel 16 bit ADC, 5000 samples/sec
• Electrode connection : RE/WE/CE and GND lead, 2mm banana plugs

Potentiostat

• Applied potential range : ±4 V, 0.125 mV resolution
• Applied potential accuracy : 0.2%, or 2 mV
• Current ranges : ±1 nA to ±10 mA in 8 decades
• Measured current resolution : 0.015% of current range, minimum 0.15pA
• Measured current accuracy  : 0.2%

Galvanostat     

• Applied current resolution : 0.0125% of applied current range
• Applied current accuracy : 0.2%
• Potential ranges : ±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V
• Measured potential resolution : 0.003% of potential range, minimum 16nV
• Measured potential accuracy : 0.2%, or 2 mV

Impedance Analyser     

• Frequency range : 10µHz to 100 kHz
• Amplitude : 0.015mV to 1.0V, or 0.03% to 100% of current range
• DC offset : 16 bit dc offset subtraction, 2 dc-decoupling filters

Electrometer     

• Input impedance : >1000 Gohm //<20pF
• Input bias current : <10 pA
• Bandwidth : >2 MHz